欢迎您访问天津陆海石油设备系统工程有限责任公司网站!

这是描述信息
1 1
2 2
3 3
4 4
5 5
这是描述信息
全部分类
1/1
浏览量:
1321

LH-CGJ传感器故障检测仪

浏览量:
1321
产品编号
数量
-
+
1
产品描述
Detail

产品描述

产品原理

LH-CGJ传感器故障检测仪是对勘探录井的传感器进行故障快速诊断的仪器,可对录井的绞车、泵冲、以及标准4-20mA的模拟量传感器进行测试,为石油录井现场设备维修提供可靠测试手段。

产品参数

1、电池容量:24V / 12AH

2、仪器正常工作的电池电压范围:19V-25V

3、绞车脉冲:48个/ 圈

4、触摸屏:480 X 800 点阵;彩色

5、市电断开电池续航工作时间:>5小时(电池充满情况下)

6、重量:4.8kg

7、尺寸:327x232x167(长x宽x高)

优势特色

★ 采用24V可充锂电池供电,方便在现场端对传感器进行故障检测

★ 绞车传感器可外接光电或者接近开关的传感器

★ 模拟量传感器可外接两线制或者三线制的传感器

★ 传感器采用标准航空插座,方便与现场传感器进行直接对接测试

★ 仪器体积小,重量轻,携带使用方便

未找到相应参数组,请于后台属性模板中添加

LH-CGJ sensor fault detector is an instrument for rapid fault diagnosis of exploration logging sensors. It can test the drawworks, pump strokes, and standard 4-20mA analog sensors of logging. It is an oil logging tool. On-site equipment maintenance provides reliable testing methods.

Main technical parameters:

1, battery capacity: 24V / 12AH

2, the battery voltage range for the instrument to work normally: 19V-25V

3, winch pulse: 48 pcs/turn

4, touch screen: 480 X 800 dot matrix; color

5. The working time of the battery when the mains is disconnected: >5 hours (when the battery is fully charged)

6, weight: 4.8kg

7, size: 327x232x167 (length x width x height)

Advantages:

★ 24V rechargeable lithium battery is used for power supply, which is convenient for fault detection of the sensor on the field side

★ The winch sensor can be connected to a photoelectric or proximity switch sensor

★ The analog sensor can be connected to a two-wire or three-wire sensor

★ The sensor uses a standard aviation socket, which is convenient for direct connection test with the field sensor

★ The instrument is small in size, light in weight, and easy to carry and use

在线留言

WRITE A MESSAGE TO US

留言应用名称:
客户留言
描述:
验证码
这是描述信息

友情链接:中石油 | 中石化 | 中海油
天津陆海石油设备系统工程有限责任公司版权所有 津ICP备05000267号  网站建设:中企动力 天津
 地址:中国·天津滨海高新区华苑产业区(环外)海泰华科十路6号 电话:86-022-27387507